Measurements: 39.5 cm high x 11 cm wide.
Cable: 170 cm with European plug.
Material: Metal, Crystal and Wax.
Voltage: 220V.
Assembly: The lamp contains 3 pieces; base, bottle and cap.
The base is plugged into the mains and the bulb is turned on with the switch.
Place the bottle on top of the base with the part containing the wax on top of the bulb.
The cap is placed on the neck of the bottle.
Let it heat until the wax starts to flow. Do not turn off during the first ignition until the wax flows in its entirety because if it goes out it can result in part of the wax remaining on the top and then it will be very difficult to heat up on subsequent ignitions.
Terms of Use
During the first ignition the lava takes between 3-5 hours to heat up and to be able to see the wax flow, in later uses the lava takes less time.
The time it takes to start flowing depends on the ambient temperature, optimal use occurs in a room between 22 and 25 ºC.
Do not touch any part of the lava lamp while it is on or off The lamp takes very high temperatures to be able to work.














Reviews
There are no reviews yet.